top of page

What Causes a Sidewalk to Lift? (& How to Fix It)

Jun 18
19 min read

Updated: Oct 14

Short answer: Sidewalks lift mainly because of tree roots growing under the slab, soil that swells when it is wet or freezes in winter, and poor drainage that washes out the base on one side. Once one slab sits more than 1/4 inch higher than the next, it is a trip hazard. In most cases the lifted edge can be cut down to a smooth 1:12 slope in place, without removing the slab.

We often think of concrete as a permanent, unmoving surface. In reality, every sidewalk slab is floating on a foundation that is constantly shifting, swelling, and shrinking with changes in moisture and temperature. A sidewalk is only as good as the ground it rests on, and when that base becomes unstable, the concrete above will inevitably crack, sink, or heave. So, what causes a sidewalk to lift? More often than not, the answer isn't in the concrete itself, but in the unstable ground beneath it. This guide will explore these foundational issues so you can address the problem at its source.

Key Takeaways

  • Look Beneath the Surface

    : Most sidewalk lifting is not random; it's caused by specific issues like tree roots, water damage, or unstable soil. Pinpointing the root cause is the first step to a lasting repair, ensuring you fix the problem, not just the symptom.

  • Choose Repair Over Replacement

    : For most trip hazards on otherwise solid concrete, a full replacement is unnecessary and expensive. Targeted repairs like precision concrete cutting eliminate the danger quickly and affordably, preserving your budget and minimizing disruption.

  • Recognize That Small Hazards Create Big Liabilities

    : A minor trip hazard can lead to major consequences, including expensive lawsuits and fines for ADA non-compliance. Addressing uneven sidewalks promptly is a critical risk management strategy that protects pedestrians and your organization's finances.

Why Do Sidewalks Lift?

Have you ever noticed a perfectly flat sidewalk suddenly develop a dangerous trip hazard? It’s rarely a single event, but rather the result of powerful, slow-moving forces working just beneath the surface. Understanding what causes sidewalks to lift, sink, and crack is the first step for any property manager or municipality aiming to maintain safe, accessible pathways. An uneven sidewalk isn’t just an eyesore; it’s a liability waiting to happen.

The good news is that these issues don't appear out of nowhere. They have clear causes that, once identified, can be addressed effectively. Most lifted sidewalks are the result of environmental factors putting immense pressure on the concrete slabs. From the quiet strength of a growing tree to the dramatic effects of seasonal weather, the ground under our feet is constantly in motion. Let's look at the five most common culprits behind uneven sidewalks so you can better diagnose and manage the pathways on your property.

Tree Roots

One of the most common causes of a lifted sidewalk is the slow, persistent growth of tree roots. As trees mature, their root systems expand in search of water and nutrients. When a root encounters a solid object like a concrete slab, it doesn't stop; it simply grows thicker and stronger, exerting incredible pressure. Over time, this force can cause significant sidewalk heaving, lifting the concrete panel and creating a dangerous trip hazard. This is especially common with large, fast-growing trees planted too close to paved surfaces. The damage may take years to become noticeable, but the underlying process is powerful and relentless.

Seasonal Shifts and Freeze-Thaw Cycles

In climates with cold winters, the freeze-thaw cycle is a major contributor to sidewalk damage. Water from rain or melting snow seeps into small cracks in the concrete or the soil beneath it. When temperatures drop, this water freezes and expands by about 9%. This expansion acts like a tiny, powerful jack, pushing the sidewalk slab upward. As the weather warms and the ice thaws, the slab may settle back down, but often not to its original position. Repeated freeze-thaw cycles year after year can progressively worsen the lift, creating significant and uneven gaps between sidewalk panels.

Soil Erosion and Poor Compaction

The stability of a sidewalk depends entirely on the ground beneath it. If the soil base wasn't properly compacted before the concrete was poured, it can settle over time, creating voids. This lack of support causes slabs to sink or tilt, resulting in an uneven surface. Similarly, soil erosion from rainwater or poor drainage can wash away the supporting soil from under the concrete. This process leaves the slab unsupported, making it vulnerable to cracking and sinking. A sidewalk with a compromised base is much more likely to become a trip-and-fall liability as adjacent slabs shift and settle at different rates.

Drainage Problems and Soil Moisture

Water is a primary factor in many sidewalk issues, especially in areas with clay-rich soils. These types of soils are expansive, meaning they swell significantly when they absorb water and shrink as they dry out. This constant movement puts a tremendous amount of stress on the rigid concrete slabs above. Poor drainage around a sidewalk can keep the soil perpetually saturated, leading to upward pressure that lifts the concrete. Conversely, during a drought, the shrinking soil can cause the sidewalk to sink and crack. This cycle of expansion and contraction makes it nearly impossible for the sidewalk to remain level without proper soil and water management.

Heavy Loads and Traffic

While the ground underneath is the primary stage for sidewalk movement, what happens on top matters, too. Sidewalks are generally designed for foot traffic, not heavy vehicles. When maintenance trucks, garbage trucks, or other vehicles repeatedly drive over or park on a sidewalk, the immense weight can stress the concrete and the soil base. This is especially damaging if the underlying soil is already weak or poorly compacted. Over time, this repeated heavy load can cause slabs to crack, sink, or shift, accelerating the formation of trip hazards that might have otherwise taken years to develop.

How Do Tree Roots Lift Sidewalks?

Trees are a beautiful and essential part of any community, offering shade, improving air quality, and adding property value. But as a property manager or municipal contact, you know they can also be a leading cause of sidewalk damage. When tree roots grow unchecked beneath concrete, they can cause sections to lift and crack, creating dangerous uneven surfaces. This process, often called "sidewalk heaving," is a natural consequence of a tree's growth cycle meeting the unyielding nature of pavement.

While the tree is just doing what it’s designed to do, the resulting uplift creates significant problems. These uneven slabs aren't just an eyesore; they are serious trip hazards that can lead to pedestrian injuries and expose property owners to liability claims. Understanding how this happens is the first step toward managing your sidewalks effectively and keeping your community safe. Below, we’ll look at how roots exert pressure, which trees are the most common culprits, and what you can do to prevent future damage.

How Root Growth Creates Pressure

A tree's root system is constantly expanding in search of water, oxygen, and nutrients. As roots grow in diameter and length, they exert a slow but powerful force on their surroundings. When a root encounters a sidewalk slab from below, it doesn't just stop growing. Instead, it continues to expand, and the upward pressure builds until it eventually lifts the concrete panel. This is why you often see sidewalks that look like they’ve been pushed up from underneath right next to a large tree.

This "sidewalk heaving" can displace a concrete slab by several inches, creating a dangerous trip hazard for pedestrians. Even a small height difference of a quarter-inch can be enough to catch a toe and cause a fall, leading to potential injuries and legal issues. The pressure from root growth is relentless, and without intervention, the problem will only get worse over time.

What Trees Cause the Most Damage?

Not all trees are equally destructive to sidewalks. The species most likely to cause damage are those with shallow, aggressive root systems that spread out horizontally near the surface. Large, fast-growing trees are often the biggest offenders. For example, species like silver maples, sweetgums, oaks, and sycamores have extensive root networks that are notorious for pushing up pavement as they mature.

These trees are often planted in narrow parkways or tree lawns that don't provide enough space for their roots to grow naturally. Confined to a small patch of soil, the roots have nowhere to go but up and out, putting them in direct conflict with adjacent sidewalks and curbs. When planning new landscaping, selecting tree species with deeper, less aggressive root systems can help avoid these issues down the road.

How to Prevent Tree Root Damage

The best way to deal with root-related sidewalk damage is to prevent it from happening in the first place. Proper planning and proactive measures are key. When planting new trees near pavement, one of the most effective strategies is to install root barriers. These are underground panels made of plastic or fabric that guide roots to grow downward, away from the sidewalk base.

Choosing the right tree for the right place is also critical. Opt for smaller, slower-growing species with less invasive root systems if you're planting in a tight space. Additionally, ensure there is adequate open soil volume for the tree to thrive. A larger tree lawn gives roots more room to expand without interfering with your concrete infrastructure. These preventative steps can save you significant time and money on future repairs.

How Weather Affects Sidewalks

Weather is one of the biggest culprits behind sidewalk damage. From freezing winters to scorching summers, the elements put constant stress on concrete surfaces. Understanding how these seasonal changes affect your sidewalks is the first step in preventing trip hazards and maintaining safe, accessible pathways for everyone. This constant exposure can lead to lifting, cracking, and uneven surfaces that pose a risk to pedestrians and a liability for property owners.

What Is the Freeze-Thaw Cycle?

During winter, the ground beneath your sidewalks can become a real problem. The freeze-thaw cycle starts when water from rain or melting snow seeps into the soil under the concrete slabs. As temperatures drop below freezing, this trapped water turns to ice and expands, pushing the soil and the concrete upward. When the weather warms up, the ice melts and the ground settles again, but it rarely returns to its original position. This constant up-and-down movement puts a huge amount of stress on the rigid concrete. Since concrete isn't flexible, this pressure eventually leads to cracks and uneven slabs, creating dangerous trip hazards.

Heat Expansion and Contraction

Just as cold can cause problems, so can extreme heat. Concrete naturally expands in high temperatures and contracts as it cools. On a hot summer day, sidewalk slabs can expand enough to push against each other with incredible force. If the expansion joints between the slabs are too small or filled with debris, there’s nowhere for this pressure to go. This stress can cause the concrete to buckle or heave upwards at its weakest point, often at a joint. You might have seen a similar effect with buckled pavement on a sweltering day. This thermal expansion can quickly turn a perfectly flat sidewalk into a significant liability.

Why Wet Soil Makes Things Worse

Water doesn't need to freeze to cause sidewalk damage. Heavy rainfall can be just as destructive, especially depending on your soil type. Clay-rich soils, which are common in many areas, are particularly troublesome. These soils are "expansive," meaning they swell up like a sponge when they absorb a lot of water. As they dry out, they shrink and crack. This constant cycle of expansion and contraction creates an unstable foundation beneath your sidewalks. Over time, this movement causes the concrete slabs to shift, sink, or lift unevenly. Proper drainage is key, as poorly managed water flow can worsen soil erosion and lead to even more significant displacement and costly repairs.

How Soil Quality Leads to Uneven Sidewalks

When you see a lifted or sunken sidewalk, it’s easy to blame the concrete itself. But often, the real culprit is hiding just beneath the surface. The soil that supports your concrete slabs is the foundation of your walkway, and if that foundation is unstable, the sidewalk will inevitably shift. Soil-related issues are some of the most common causes of uneven concrete, creating significant trip hazards and liability risks for property managers and municipalities.

Understanding the specific soil conditions on your property is the first step toward a lasting solution. Three main issues typically cause problems: soil that wasn't packed down correctly during construction, soil that naturally swells and shrinks with moisture, and soil that washes away over time. Each of these problems exerts powerful forces on the concrete above, leading to heaving, sinking, and cracking. Identifying the underlying cause helps you choose the right repair method and prevent the same issues from happening again.

Poorly Compacted Soil

Think about the ground preparation before a sidewalk is poured. The soil must be tightly compacted to create a stable, solid base. If this crucial step is rushed or done improperly, it leaves behind loose soil and air pockets. Over time, the weight of the concrete, combined with foot traffic and natural settling, causes this loose soil to compress further. As the ground beneath the concrete shifts or sinks, it leaves the slabs unsupported. This leads to adjacent slabs becoming misaligned, with one sinking lower than its neighbor and creating a dangerous situation that requires immediate trip hazard removal.

Expansive Clay Soils

Not all soil is created equal. Certain types of clay soil are known as "expansive" because they act like a sponge, absorbing huge amounts of water. When these expansive soils become saturated after heavy rain or due to poor drainage, they can swell dramatically. The force of this expansion is powerful enough to lift entire sections of a concrete sidewalk, causing significant heaving. Then, during dry periods, the clay shrinks and cracks, causing the slab to settle again, often unevenly. This constant cycle of swelling and shrinking puts immense stress on the concrete, leading to cracks and persistent instability.

Soil Erosion and Washouts

Water is a persistent enemy of stable sidewalks. Poor drainage, broken sprinkler lines, or even heavy rainfall can channel water underneath your concrete slabs. As this water flows, it can slowly erode the soil, washing away the base that supports the concrete. Over time, this can create significant voids and empty pockets beneath the sidewalk. Without a solid foundation, the concrete slab can tilt, sink, or crack under its own weight, creating abrupt, hazardous ledges. A small drainage problem can quickly turn into a major sidewalk issue and a violation of ADA-compliant standards if the resulting erosion isn't addressed.

Are Sidewalks Ever Raised on Purpose?

It might seem counterintuitive when you're focused on fixing lifted concrete, but yes, sidewalks are intentionally built to be higher than the street. This isn't an accident; it's a fundamental part of safe and functional urban design that goes back centuries. When a sidewalk is first installed, its elevation serves several key purposes that protect both pedestrians and the infrastructure itself.

First and foremost, a raised sidewalk creates a clear, physical separation between people and vehicle traffic. The curb acts as a protective boundary, discouraging cars and bicycles from veering into the pedestrian path. This elevation also makes people on foot more visible to drivers, which is a simple but effective safety measure. The entire design helps in prioritizing people and creating a safer walking environment.

Proper water management is another critical reason. By design, a raised walkway allows rain and melting snow to run off the path, into the gutter, and toward storm drains. This prevents water from pooling on the walking surface, which reduces the risk of slips and minimizes water damage to the concrete over time. Historically, this was even more important, as the first raised paths were designed to keep pedestrians out of the mud, animal waste, and debris that cluttered early streets. So, while the uneven lifting from tree roots or soil issues creates dangerous trip hazards, the original, uniform elevation of a sidewalk is a feature, not a flaw.

What Happens If You Ignore a Lifted Sidewalk?

It can be tempting to put off sidewalk repairs, especially when budgets are tight. But that small, uneven slab of concrete is more than just an eyesore. Ignoring a lifted sidewalk can create a cascade of problems, turning a minor issue into a major liability. From expensive lawsuits to worsening structural damage, the consequences of inaction almost always outweigh the initial cost of a professional repair. Addressing these hazards promptly protects pedestrians, your budget, and your property's integrity.

The Risk of Trip-and-Fall Liability

A seemingly minor lift in a sidewalk panel can have serious consequences. According to safety standards, a height difference of just a quarter-inch can create a significant trip hazard. For property managers, HOAs, and municipalities, this represents a major legal and financial risk. A single trip-and-fall incident can lead to personal injury lawsuits, insurance claims, and costly legal battles. Proactively managing your property includes a plan for trip hazard removal to ensure the safety of everyone who uses your walkways and to protect your organization from preventable liability claims.

The Cost of ADA Non-Compliance

Well-maintained sidewalks are not just about preventing trips; they are a matter of accessibility. The Americans with Disabilities Act (ADA) mandates that public pathways be safe and accessible for everyone, including individuals who use wheelchairs or have mobility challenges. Ignoring lifted or uneven sidewalks can result in non-compliance with these federal regulations. This failure can lead to formal complaints, investigations by the Department of Justice, and significant financial penalties. Ensuring you have ADA-compliant sidewalks is a legal responsibility and a crucial part of fostering an inclusive and safe community.

Making the Damage Worse

A lifted sidewalk is often a symptom of an underlying issue, like soil erosion or pressure from tree roots. When you ignore the initial problem, the damage rarely stays the same. Water can seep into the gap, washing away more soil and causing the slab to sink or tilt even further. This can create a domino effect, compromising the stability of adjacent sidewalk panels. What might have been a simple, quick fix can evolve into a complex and expensive repair, potentially requiring a full slab replacement. Addressing the issue early is the most cost-effective way to manage your concrete assets.

How to Fix a Lifted Sidewalk

When you discover a lifted sidewalk on your property, your first thought is likely about safety and liability. The good news is you have several repair options, and you don’t always have to resort to a full, costly replacement. The right solution depends on the severity of the lift and the overall condition of the concrete. For most common trip hazards, a precise repair can restore safety quickly and affordably.

Understanding your choices will help you make the best decision for your property, budget, and long-term maintenance plan. We’ll walk through four common methods for fixing a lifted sidewalk: concrete cutting, slabjacking, polyurethane foam injection, and full slab replacement. Each has its own use case, from addressing a minor trip hazard to overhauling a completely failed section of pavement. By evaluating the pros and cons, you can find a solution that keeps your walkways safe and ADA compliant.

Concrete Cutting for Trip Hazard Removal

Concrete cutting is a precise and efficient method for eliminating trip hazards. Instead of lifting or replacing the slab, this technique involves making a clean, angled cut across the raised edge of the concrete panel. This removes the hazardous lip and creates a smooth, level transition between sidewalk sections. Unlike other methods, this approach directly addresses the trip hazard itself without injecting materials or requiring cure time.

This is the fastest and most cost-effective way to restore sidewalk safety. The process is clean, quiet, and creates no mess, allowing pedestrians to use the sidewalk almost immediately after the repair. Because it’s a targeted fix, it preserves the integrity of the surrounding concrete. Precision trip hazard removal is an ideal solution for property managers and municipalities looking to quickly resolve safety issues and maintain compliance across many locations.

Slabjacking and Mudjacking

Slabjacking, sometimes called mudjacking, is a technique used to lift a sunken concrete slab back into place. The process involves drilling holes into the settled sidewalk panel and pumping a slurry mixture underneath it. This mixture, typically made of cement, soil, and water, fills the void beneath the slab and hydraulically lifts it back toward its original height.

This method can be effective for correcting moderately sunken slabs rather than raised ones. However, the process can be messy, and the material injected is heavy, adding significant weight to the underlying soil. It also requires cure time before the sidewalk can handle foot traffic. While it addresses the slab’s height, it may not create a perfectly even surface, sometimes leaving a small lip that still needs to be addressed.

Polyurethane Foam Injection

A more modern alternative to slabjacking is polyurethane foam injection. This method also involves drilling small holes into the concrete, but instead of a cement slurry, a high-density structural foam is injected into the voids below. The two-part polymer mixes and expands, lifting the concrete slab quickly and with minimal force. The foam cures rapidly, creating a strong, stable, and lightweight base.

This technique is known for being a faster and cleaner process than traditional mudjacking. The foam is also water-resistant, which helps prevent future erosion under the slab. While it’s an effective way to lift and stabilize concrete, it is often more expensive than other methods. Like slabjacking, it focuses on lifting the entire slab, which may not be necessary if you only need to remove a trip hazard.

Full Slab Replacement

In cases of extreme damage, full slab replacement is the only viable option. If a sidewalk panel is severely cracked, crumbling, or has heaved several inches, a repair may not be enough. This process involves demolishing and removing the old, damaged concrete, preparing the sub-base, and pouring a brand-new sidewalk slab.

While a full replacement provides a brand-new surface, it is by far the most expensive, disruptive, and time-consuming solution. The area will be closed off for an extended period to allow the new concrete to cure properly. This option should be reserved for slabs that are structurally compromised beyond repair. For simple trip hazards on otherwise solid concrete, less invasive methods are much more practical and budget-friendly.

How to Prevent Future Sidewalk Lifting

Fixing a lifted sidewalk is a great first step, but your work isn’t finished once the immediate hazard is gone. To protect your property and budget long-term, you need a proactive maintenance plan. Preventing future lifting is far more cost-effective than repeatedly paying for repairs. By addressing the root causes of sidewalk damage, you can maintain safe, accessible walkways for years to come.

These preventative strategies will help you get ahead of common issues like water damage and root intrusion. A little bit of foresight can save you from major headaches and expenses down the road, ensuring your sidewalks remain stable and compliant. It all starts with understanding what your concrete is up against and taking simple steps to protect it.

Improve Drainage Around Sidewalks

Water is one of the biggest culprits behind sidewalk lifting. When water pools around or under concrete slabs, it saturates the soil, leading to erosion and instability. In colder climates, this moisture freezes and expands, pushing slabs upward. To prevent this, you need to manage water flow effectively. Start by checking that all gutter downspouts direct water away from your walkways. The surrounding landscape should be graded to slope away from the concrete, not toward it. Keeping nearby storm drains and channels clear of debris is also crucial for preventing backups during heavy rain. Addressing these underlying drainage issues is a key part of any strategy for lasting sidewalk repair.

Install Root Barriers Early

Tree roots are incredibly powerful and are a primary cause of lifted sidewalks. As they grow, they seek out water and can exert enough pressure to heave heavy concrete slabs. The best defense is a good offense. When planting new trees near walkways, you can install root barriers to guide roots downward, away from the concrete’s base. For existing trees, a certified arborist can sometimes install barriers, but it’s a more complex process. Choosing tree species with less aggressive, deep-root systems is also a smart move for new landscaping projects. Proactive measures like these are the most effective way to prevent conflicts between your trees and your pavement.

Schedule Regular Sidewalk Inspections

You can’t fix a problem you don’t know you have. Regular inspections are the cornerstone of any effective sidewalk maintenance plan. At least once or twice a year, walk your property specifically to look for early signs of trouble: hairline cracks, slight changes in slab height, or areas where water pools after it rains. Catching these issues early makes the fix simpler and less expensive. An effective sidewalk maintenance management program leads to a significant reduction in accident risks. For larger properties or municipalities, a professional assessment using GIS-based sidewalk data can create a detailed inventory and prioritize repairs efficiently.

Seal Cracks Before They Worsen

A tiny crack might not look like a big deal, but it’s an open invitation for water to seep beneath your sidewalk. Once water gets in, it can erode the soil base or freeze and expand, turning a small crack into a major trip hazard. Following a seasonal maintenance checklist can help you stay on top of these small repairs. By cleaning out and sealing cracks with a flexible concrete sealant as soon as you spot them, you cut off this destructive cycle. This simple, low-cost task is one of the most effective things you can do to extend the life of your sidewalks and prevent the need for more extensive repairs later on.

Choose the Right Repair for Your Property

With several ways to fix a lifted sidewalk, choosing the right one depends entirely on the specific issue you’re facing. Before you decide on a method, take a moment to assess the situation on your property. Is a single, raised edge creating a dangerous trip hazard? Or has an entire concrete slab sunk due to soil issues underneath? The cause and the severity of the damage will point you toward the most effective and lasting solution.

If your primary goal is to eliminate a trip hazard where two sidewalk panels meet, precision concrete cutting is the most efficient and accurate repair. This technique removes the hazard by cutting the raised concrete to create a smooth, sloped transition that is immediately safe and ADA-compliant. It’s a targeted fix that addresses the danger without the cost and disruption of a full replacement. For larger sections of sidewalk that have sunken, slabjacking or polyurethane foam injection can raise the concrete back to its original level, provided the slab itself is still in good shape.

However, if the concrete is extensively cracked, crumbling, or broken, replacement is often the only viable path forward. While it’s the most intensive option, it’s necessary when the slab’s structural integrity is compromised. Ultimately, the best repair is one that fits into a long-term sidewalk maintenance plan. A professional assessment can help you identify the root cause of the problem and select a repair that ensures your property remains safe and accessible for years to come.

Related Articles

Frequently Asked Questions

My sidewalk is only lifted by an inch. Do I really need to fix it? Yes, you absolutely do. A height difference of just a quarter-inch is enough to be considered a trip hazard by safety standards, creating a serious liability for your property. Ignoring it won't make the problem go away; it will likely get worse as water and soil shifts continue to affect the slab. A prompt repair is the most responsible and cost-effective way to protect pedestrians and your organization from potential injury claims and legal issues.

What's the difference between concrete cutting and slabjacking? The main difference is what problem they solve. Concrete cutting directly removes the trip hazard itself. It uses a precise cut to remove the raised lip of a concrete slab, creating a smooth and safe transition. It's a clean, immediate fix for an uneven edge. Slabjacking, on the other hand, attempts to lift an entire sunken slab by pumping a slurry mixture underneath it. This process can be messy, adds weight to the soil, and may not perfectly level the slabs, sometimes leaving a small hazard behind anyway.

When is it better to replace a sidewalk instead of repairing it? You should only consider a full replacement when the concrete slab is structurally ruined. If the panel is shattered, crumbling, or broken into multiple pieces, a repair won't be effective. However, if the slab is still solid but is simply lifted or sunken, a repair is almost always the better choice. Methods like precision cutting are far less expensive, faster, and less disruptive than tearing out and pouring new concrete.

Can I prevent my sidewalks from lifting in the first place? While you can't control everything, you can definitely take steps to minimize future problems. The two most important factors are water and trees. Make sure your property has proper drainage, with sprinklers and downspouts directing water away from walkways. When planting new trees, choose species with deeper, less aggressive root systems and install root barriers to guide growth away from the concrete. Regular inspections and sealing small cracks can also prevent water from getting under the slab and causing damage.

A tree root is lifting my sidewalk. Do I have to cut down the tree? No, removing the tree is usually a last resort and is rarely necessary to fix the sidewalk. The immediate safety issue is the trip hazard, which can be resolved by precisely cutting the lifted concrete edge to restore a level path. This addresses the danger without harming the tree. For a long-term solution, you can consult a certified arborist about options like installing a root barrier, but your first step should be to make the walkway safe for pedestrians.

 
 
 

Comments


About the Author

Aaron Ollivier is the CEO of Precision Concrete Cutting (Safe Sidewalks), a leader in concrete cutting for trip hazard removal and ADA-compliant sidewalk repair. With over 20 years of experience, he specializes in precision methods that restore accessibility, reduce liability, and extend asset life. Aaron’s expertise spans concrete cutting, ADA compliance, and trip hazard remediation for municipalities and commercial properties across the United States, delivering safer, walkable communities for everyone.​ Read his full bio.

​

​

bottom of page
See more from PCC on Google